Ampire BTR301-HD - Bluetooth receiver

Ampire BTR301-HD - Bluetooth receiver

You want to wirelessly access your music, audiobooks, or navigation from your Apple iPhone or Android smartphone via Bluetooth.® If you want to listen to music in maximum sound quality in your car, then Bluetooth is the way to go.® The BTR series receivers with aptX(TM) are the solution.
They can be used with most navigation and car radio systems via Bluetooth.® -Ampire receiver wireless A2DP Bluetooth® Retrofit audio streaming.

The connection is easy to set up and is automatically re-established via Bluetooth.® 5.0.
The BTR series uses Bluetooth® -protocol for headphones on your smartphone and affects the functionality of your Bluetooth® No hands-free function.

The BTR301-HD Bluetooth® The receiver is designed for navigation and car radio systems with a 3.5mm jack input and power supply via USB-A.

Bluetooth® Listen in CD quality with aptX(TM)?

Alternative to the standard Bluetooth® We also have receivers with the Bluetooth codec.® aptX(TM).
This codec is becoming increasingly popular. If you use devices with the aptX standard, you can improve the sound quality of your Bluetooth connection.® -Streams significantly increased.

What improves Bluetooth?® aptX(TM)?

with the aptX codec® A more efficient method for compressing the audio data is used, which makes better use of the available bandwidth.
The prerequisite for aptX(TM) streams is that both the playback device and the sender are Bluetooth-enabled.® also supports aptX(TM).
The function can be identified by aptX.® -Logo on the device. The codec supports common audio formats such as MP3 and FLAC.

Which smartphones support Bluetooth?® aptX(TM)?

Not all Android smartphones support Bluetooth.® aptX(TM) codec.
You can check whether your Android smartphone is compatible in your smartphone's technical specifications.
An Apple iPhone supports Bluetooth® Codec aptX(TM) is generally not supported.

Connections

• Audio output: 3.5mm jack plug
• Power supply: USB input (5 VDC)

equipment

• Splash-proof, marine certified
• automatic activation
• QDL licensed Bluetooth® 5.0
• A2DP in the highest EDR specification
• aptX(TM) audio codec by Qualcomm®
• BT Audio Streaming also supports lossless files such as Wave, FLAC, Lossless, etc.
• 3.5mm jack plug with 4V RMS signal output
• SSID Display Name: BTR300-HD
• 10m range

Smartphone compatibility

• Android (Bluetooth® and Bluetooth® aptX(TM)
• Apple iOS (Bluetooth® )

Optional accessories

• 55100-KLAUE AMPIRE interference suppression filter

Technical data

• Voltage: 5 volts DC
• Current consumption: <45mA
• Bluetooth® 5.0
• aptX(TM) audio codec by Qualcomm®
• Frequency range: 18Hz-25kHz
• Encoding: Low Complexity Subband Codec (SBC)
• Bitrate: up to 384 kbps (48 kHz sampling)
• Audio output voltage: 1V RMS
• Bluetooth 5.0 / Transmit power <10mW EIRP and aptX
• Cable length: 300mm
• Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm

Bluetooth approval

• Declaration ID D068331
• Referenced Qualified Design ID 173056
• Listing Date 2024-04-18

Pair device

• Make sure Bluetooth is turned on on your device.
• Turn on the ignition
• The LED (6) flashes blue (pairing mode)
• To connect, select BTR300-HD in your device's Bluetooth menu.
• After a successful connection, the LED lights up continuously and a single beep sounds through the audio system.

Notice

• Up to 9 devices can be connected to the BTR301-HD, but only one device can stream music at a time.
• The BTR300-HD always remembers the last paired device and connects automatically after being switched on.
• A connection to another device must be made manually, as described above.
• If the connected device is out of range for more than one minute, the connection will be automatically interrupted and the BTR301.HD will enter pairing mode [the LED (6) will blink]
• Only usable in vehicles and not in continuous operation

operation

• All settings, such as volume, music selection and play/pause, are made on your device.
• The BTR301-HD can be installed out of sight because it has no controls or buttons that need to be operated.