Thitronik G.A.S.-pro III - Gaswarnsystem Generation 2020

Thitronik GAS-pro III - The new generation 2020

It can do everything that the standard GAS-pro can do, just a few, in many ways, much better.
The GAS-pro III will even be available in two basic setups: one, as is known, with an integrated liquid gas or anesthetic gas sensor and one with an integrated CO sensor. Both variants can be combined with another gas or CO sensor.

Otherwise, the GAS-pro III presents itself as a technical quantum leap: its current consumption drops to a minimum of 26 mA with an integrated liquid gas / KO gas sensor, and to just nine milliamps with an integrated CO gas sensor.

The internal siren increases to a penetrating 94 dB, an integrated moisture sensor optimizes the already precise measurement in high humidity in the vehicle or with breathing air in close proximity to the sensor. In addition, an alcohol filter function (liquid gas / KO gas sensor) eliminates false alarms caused by alcohol in the air.

Last but not least: thanks to the integrated radio unit, the new GAS-pro III does not have to be connected to the control center, but only to the vehicle electrical system. Finally connect to the control center via easy add. Finished.

• Gas detection according to DIN EN 50194-2
• Gas detection according to DIN EN 50291-2 (CO version)
• CI bus capable
• Detects propane and butane, or anesthetic gases
• Carbon monoxide (depending on equipment)
• permanent temperature compensation
• regular self-test to determine the
• Functionality
• Alarm output / siren output
• Auto Sense entrance
• Alcohol filter function
• Buttons for "pause" and "ON / OFF"
• LED display for both sensors

Technical specifications

• Power supply 12 / 24V DC
• Current consumption 9 mA (CO) / 26 mA (liquid / KO gas)
• Sensor inputs 1 × internal, 1 × external
• Sensitivity 50 ppm (CO) / 700 ppm (butane)
• Sound pressure 94 dB (internal siren)
• Temperature range from -20 ° C to + 60 ° C
• Dimensions (W x H x D) 61 x 97 x 35 mm
• Weight about 74 grams