Ampire KC403-50 - Einbau Rückfahrkamera

The KC403-50 is installed as a color built-in camera. It is a reversing / surveillance camera with limitless areas of application in cars, buses, mobile homes, trucks, trailers or for monitoring properties, buildings and rooms. The plastic housing is weatherproof and waterproof. The delivery is complete with a 700cm connection cable and a new mini-plug. The image reproduction is already mirrored on delivery as a reversing camera and can be set to normal display.

Technical specifications

• Image reproduction: mirrored at the factory (normal display adjustable)
• Auxiliary lines: switched off at the factory (can be switched on)
• Camera tilt: 50 degrees to the mounting hole
• Sensor type: 1/3 '' Color CMOS (PC7070) 
• Lens: 1.7mm 
• Release in lines: 420TVL 
• Resolution in pixels: 640 x 480 
• Image standard: NTSC 
• Frame rate: 60Hz 
• Light sensitivity: <0.5 lux 
• diagonal viewing angle: 170 degrees
• White balance: automatic 
• Level adjustment: automatic 
• Output signal: Cinch 1.0 Vpp 75 Ohm 
• Working temperature: -40 ° C to + 80 ° C 
• Operating voltage: 13.8 volts DC
• Weight: 19g 
• Splash-proof according to IP67
• Power consumption: 70mA 
• Dimensions: 30 x 29 x 24mm (LxHxW) 
• Installation opening: 21mm
• Installation depth: 14mm
• Bracket: stainless steel 
• Cable length: 700cm

Approvals

• E approval: E13-10R00-10R02-3857-00 
• CE approval: 2014/30 / EU, EN 50498: 2010
• EC 1907/2006 REACH 
• RoHS complied

scope of delivery

• camera 
• 700cm connection cable
• poetry

Important NOTE

When cleaning the vehicle, avoid direct contact between the camera lens and high-pressure cleaners. Do not install the camera at the front of the vehicle, the glass lens would be destroyed by gravel from vehicles in front. The camera is not suitable for continuous operation or monitoring. It must not be operated with an ignition (K15), otherwise the camera could be damaged by overheating.

Legal notice

An increase in vehicle dimensions, with the exception of cars and motorcycles, is subject to registration and must be assessed immediately by the technical test center or an officially recognized monitoring organization (DEKRA, GTÜ, KÜS, TÜV). Before installing or converting the vehicle, ask an officially recognized expert for motor vehicle traffic or a test engineer from a monitoring organization whether the operating license will be affected or whether the change can be approved at all. The return of a used camera for credit is excluded.