Ampire KC903 - Rückfahrkamera, NTSC-selbstklebend

AMPIRE color reversing camera, self-adhesive rubber holder

The KC903-NTSC surface-mounted camera is a first-class reversing / surveillance camera with unlimited areas of application in cars, buses, mobile homes, trucks or trailers or for monitoring properties, buildings and rooms. The housing is weatherproof, waterproof and very stable. For assembly, the flexible mounting surface of the camera is simply glued in the desired position using the 3M adhesive pad. The delivery is complete with a connection cable and a new type of mini-plug that makes laying the cables much easier. The standard image display is mirrored, but can be set to unmirrored.

Technical specifications

• Image display: normal (mirrored display can be switched on)
• Auxiliary lines: switched off (auxiliary lines can be switched on)
• Sensor type: 1 / 3.7 '' Color CMOS (PC3030K) 
• Lens: 1.7mm 
• Release in lines: 420TVL 
• Resolution in pixels: 640 x 480 
• Image standard: NTSC 
• Frame rate: 60Hz 
• Light sensitivity: <0.5 lux 
• diagonal viewing angle: 170 ° 
• White balance: automatic 
• Level adjustment: automatic 
• Output signal: Cinch 1.0 Vpp 75 Ohm 
• Working temperature: -40 ° C to + 80 ° C 
• Operating voltage: 13.8 volts DC
• Weight: 38g 
• Power consumption: 70mA 
• Dimensions: 70 x 40 x 23.5mm (LxWxH) 
• Bracket: rubber with 3M adhesive pad
• Cable length: 700cm

Approvals

• E approval: E13-10R00-10R02-3857-00 
• CE approval: 2014/30 / EU, EN 50498: 2010
• EC 1907/2006 REACH 
• RoHS complied

scope of delivery

• Camera in the rubber holder
• 700cm connection cable

Important NOTE

When cleaning the vehicle, avoid direct contact between the camera lens and high-pressure cleaners. Do not install the camera at the front of the vehicle, the glass lens would be destroyed by gravel from vehicles in front. The camera is not suitable for continuous operation or monitoring. It must not be operated with an ignition (K15), otherwise the camera could be damaged by overheating.

Legal notice

An increase in vehicle dimensions, with the exception of cars and motorcycles, is subject to registration and must be assessed immediately by the technical test center or an officially recognized monitoring organization (DEKRA, GTÜ, KÜS, TÜV). Before the installation or conversion, ask an officially recognized expert for motor vehicle traffic or a test engineer from a monitoring organization whether the operating license will be impaired or whether the change can be approved at all. The return of a used camera for credit is excluded.