NAVLINKZ CAM-N168 - bullet camera

NAVLINKZ CAM-N168

Mini under-mount camera with adjustable ball head NTSC, 1/4-inch CMOS HD with 200° diagonal wide angle, in black. Can also be used as a front camera. Switchable guide lines, adjustable for cars/trucks. Under-mount and surface-mounted installation possible. IP69K. Total 8.70m cable. Smaller than standard cameras!

Mini NTSC front and rear view camera with adjustable ball head and two housings. Easy installation via a threaded cable-guiding tube with a lock nut (housing 1) or a screw- or adhesive-mounted housing (housing 2). Horizontal under-mount and vertical installation possible by rotating the ball. Professional system cable set with sufficient length and automotive connectors. Thanks to the small-diameter connector, the cable is easier to install.

Product Features

• Mini Ball Camera NTSC (black) with 2 housings
• Housing 1: Threaded tube with lock nut
• Housing 2: Screw-on or adhesive-mounted
• Optional Housing 3: Rubber ring for recessed installation (Item No. HD-B168-02 must be ordered separately)
• Horizontal sub-mounting and vertical mounting possible (by rotating the ball)
• System cable with pass-through, e.g., for reversing signal
• Mirroring can be switched off - can also be used as a front camera
• Sensor type: CMOS 1/4-inch NTSC HD, low-light sensitive
• Aperture F1.2
• Minimum illumination 0.01 lux,
• Resolution 960x480 HD and 800 TV lines
• Angle horizontal 160°, vertical 118°, diagonal 200°
• Guide lines can be switched off
• Width of the guide lines can be selected for cars or trucks
• Protection class IP69K
• Suitable for continuous operation (ACC)
• Video connection: RCA plug
• Camera connector system: 4-pin 3V

Dimensions

• Camera housing without threaded pin (housing 1) 24.2 x 24.35 x 22mm (W x D x H)
• Camera connector diameter: 4.5mm
• Total cable length: 8.70m

Technical specifications

• Operating voltage: +12V/24V DC (6~28V)
• Current consumption: 50mA
• Operating temperature: -30°C to +75°C
• Storage temperature: -40°C to +80°C