Ampire KAX-T6-H - Camera (AHD/CVBS), for Volkswagen T6/T6.1 with tailgate

KAX-T6-H

High-resolution AHD/CVBS reversing camera for Volkswagen  Transporter T6/T6.1 with tailgate. This brake light camera is mounted in place of the factory-installed brake light lens. The camera was intentionally not positioned in the center of the brake light lens so that it can also be used when a load carrier is mounted on the tailgate.

Technical data

• Video standard AHD 1080P 25F or CVBS
• Image sensor: GC2399 (FH8536H)
• Image sensor size 1/2.7
• Resolution 1920x1080 pixels
• 3D noise reduction
• Sequential Scanning
• Minimum illumination: 0.005 lux
• Signal-to-noise ratio >50dB
• Automatic white balance
• Image display horizontally mirrored
• Guidelines: switched on (can be switched off by disconnecting the cable loop)
• horizontal viewing angle 155°
• vertical viewing angle 100°
• diagonal viewing angle 185°
• Camera head adjustable vertically up to 20°
• Protection class IP69 waterproof
• Operating voltage: 12/24 volts DC
• Power consumption: max. 75mA
• Operating temperature: -20° to 70°C
• Color: black
• Cable length: 10 meters with 4-pin MINI-DIN connectors
• E Approval E9-10R-05.1652
• CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
• FCC Approval ANSI C63.4-2003

Scope of delivery

• reversing camera
• AK1037 power supply with blue connectors
• AK1039 Mini-DIN extension cable 10m with blue connectors

Important NOTE

Depending on the roof design and the vehicle's installed towbar, the towbar may not be visible on the monitor.

Note regarding ordering

This camera is a high-resolution AHD camera with 1080p resolution and 25 frames per second. This camera can only be connected to compatible monitors, car radios, or interfaces. If your monitor's camera input only supports CVBS, composite video, or NTSC video signals, this AHD camera is unsuitable, and you should use the identical CVBS camera with NTSC video signal.