Kufatec Cabrio-Modul für Audi A4(8H)

Roof module for enhanced roof operation.
Roof operations will be controlled through the original remote
control and / or the indoor roof switch .
Software can be updated in the future

Module options:
Module activation / deactivation
- One-touch roof operation (remote / indoor roof switch)
- Roof operation up to 40 km/h
- Due to security reasons all operations can be interrupted
- Roof operation will resume in case of over speeding, i.e:if
you start a roof operation and drive faster than the specified
max speed the roof operation will automatically resume by driving
less than the max speed within 10 seconds.

Specifications:
Power Supply 12Volt (8 - 15 Volt)
Power Input 90 mA
Standby Current <0.03 mA
Dimensions in mm 54 x 45 x 22
Approval E13 10R-02-3950

Scope of delivery:
- 2 Comfort - Module (indoor + outdoor)
- 2 Sets of cables
- Fitting instruction for download

Notes:
- In the standby mode, each device consumes a small amount of power.
Even complex vehicle controllers should not need more than 2.0mA to
avoid an empty battery after a long standing time, e.g. after a holiday.
Standby consumption is under 0.06mA (<0.72 Watt at 12V voltage)
- Cabrio roofs do not have an automatic protection against clamping
(pinch protection), so the operator must take care that no objects or
persons (especially children) are near the closing area of the roof while
it is in motion. It is strongly recommended to watch the car for the entire
closing process. If people are close to the roof, the process can be
immediately stopped by pressing a button on either the remote control or
on the interior roof button.
- Kufatec Electronics GmbH & Co. KG is not responsible for injury or damages
in the case that this safety instruction is disobeyed.