RetroSound MODEL-APACHE-2G - Autoradio "Apache", 2. Generation

The second generation of "Apache" is based on RetroSound's "Model Two" car radio with Bluetooth hands-free, A2DP audio streaming and Apple iPod / iPhone control.
Of course, the "Apache" also has the flexible, InfiniMount-patented "RetroSound" mounting system and control knob.
With one device you get the design of your classic and do not have to do without modern digital media.
Two USB and two AUX inputs on the back panel allow you to play external MP3 players, such as an iPod or DAB + receiver.
This retrosound '' Apache '' was especially developed for the 1954 to 1959 Chevy or GMC Trucks and is delivered without front panel and control buttons. Of course it can also be installed in other vehicles.

Any concerns that your H license plate might be at risk due to the installation of a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the Retro Sound Model Zuma "and the Retro Sound Model Two" including vehicle-specific aperture and control knobs may be installed in vintage cars with H license plate or not prevent the award of the H license plate!

domestic equipments

• Playback of MP3 and WMA files via the rear USB input
• Apple iPod / iPhone control
• Bluetooth handsfree with A2DP audio streaming
• Adjustable LCD lighting with 32,000 different colors
• FM / AM radio receiver with RDS and 30 station presets
• Switchable radio frequencies (USA / EUROPE)
• New controller system with control knob and ring functionality
• Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
• 3 stereo RCA outputs for external amplifiers (front / rear / subwoofer)
• Patented "InfiniMount" mounting system and operating controller
• Compatible with all RetroSound front panels and control knobs
• 2 years manufacturer warranty
• 3 equalizer programs plus individual bass / treble / fader / balance adjustment
• E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
• XBAS loudness function
• Auto reset to factory settings when 5 minutes de-energized

expansion options

• 2 USB inputs (rear panel)
• 2 AUX inputs (stereo)
• 3 RCA outputs (stereo) for external amplifiers (front / rear / subwoofer)
• Separate switch-on line for motor antenna and amplifier

Technical specifications

FM

• European broadcasting frequency range with RDS 87.5-107.9
• Antenna external connection
• Sensitivity 12.5 dBf
• Transmitter separation 75 dB at 400 KHz
• Signal to noise ratio 62 dB
• Distortion at 1 kHz 0.8% (stereo) 0.5% (mono)
• Channel separation 32 dB at 1 kHz
• Frequency response 30-16000 Hz

MW

• Frequency range 530-1710 kHz
• Antenna external connection

IPod / IPhone compatibility

• iPod touch 4G
• iPod touch 3G
• iPod touch 2G
• iPod nano 6G
• iPod nano 5G
• iPod nano 4G
• iPod nano 3G
• Pod classic 160GB
• iPod classic 12GB
• iPod classic 80GB
• iPhone 6 Plus (optional Lightning on 30-pin adapter necessary)
• iPhone 6 (optional Lightning on 30-pin adapter necessary)
• iPhone 5 (optional Lightning on 30-pin adapter necessary)
• iPhone 4s
• iPhone 4
• iPhone 3GS
• iPhone 3G

General data

• Dimensions control element 89x38x27mm
• Dimensions radio base 101x51x136mm
• Power supply 10.5 to 14.4 volts
• Maximum current consumption 15 amps
• Quiescent current 3.5 mA
• Output 12V, 4 ohms, <1% distortion:4x15 watts sine wave
• Impedance speaker 4-8 ohms
• RCA outputs 6 channel 2.85 volts for external amplifiers (front / rear / subwoofer)
• Input sensitivity AUX1> 300 mV / 6 kOhm
• Input sensitivity AUX2> 300 mV / 6 kOhm

Legal notice
iPod and iPhone are trademarks of APPLE Computer, registered in the US and other countries.
For best results, Apple has created specific compatibility requirements for accessory manufacturers.
Products that are designed and certified to be compatible have the "Made for" label on the packaging.
To ensure compatibility when purchasing third-party accessories for use with your device, look for "Made for" accessories for your device (see below).
"Made for iPod" means that an electronic accessory is specifically designed to be connected to the iPod and has been certified by the developer to meet Apple performance standards.
"Made for iPhone" means that an electronic accessory is specifically designed to be connected to the iPhone and has been certified by the developer to meet Apple performance standards.

Vehicles with 6 volt electrical system
You need a voltage converter if you want to operate a RetroSound car radio in a vehicle with 6 volt electrical system. We recommend the DC / DC converter 2238.0 from Statron (www.statron.de) in such a case.

E-registration
E-approval:e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00

*Important NOTE
Please order a vehicle-specific front panel with control buttons for your car separately.
This is not included with the car radio.