Product information Ampire KVA-BERLINGO - rear view camera for Citroën Berlingo 3, Peugeot Rifter, Opel Combo E

High-resolution AHD rear view camera KVA-BERLINGO which is mounted instead of the factory brake light glass.
COMPATIBILITY

•  Citroen Berlingo 3 (from model year 2018)
•  Fiat Doblo 3 (K9) (from model year 2022)
•  Opel Combo E (from model year 2018)
•  Peugeot Rifter (from model year 2018)
•  Toyota Proace City (from model year 2020)

TECHNICAL DATA

•  Video standard AHD 1080P 25F
• Image sensor: GC2399 (FH8536H)
•  Image sensor size 1/2.7
•  Resolution 1920x1080 pixels
•  3D noise reduction
•  Sequential scanning
•  Minimum illumination: 0.005 lux
•  Signal-to-noise ratio >50dB
•  Automatic white balance
•  Image display mirrored horizontally
• Guide lines: switched on (can be switched off by disconnecting the cable loop)
• horizontal viewing angle 155°
• vertical viewing angle 100°
• diagonal viewing angle 185°
•  Camera head adjustable vertically up to 20°
• Protection class IP69 waterproof
•  Operating voltage: 9-16 volts DC
•  Power consumption: max. 75mA
•  Operating temperature: -20° to 70°C
•  Color: black
•  Cable length: 10 meters with 4-pin MINI-DIN connectors
•  E approval E9*10R06/00*22328*00
•  CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:2009+A2:2009; EN61000-3-3:2008; EN 55024:2010
•  FCC approval ANSI C63.4-2003

SCOPE OF DELIVERY

• Rear view camera
• AK1035 power supply
• AK1034 mini-DIN extension cable 10m

IMPORTANT NOTE
Depending on the roof structure and the trailer hitch installed on the vehicle, the trailer hitch may not be visible on the monitor.
ORDERING NOTE
This camera is a high-resolution AHD camera with 1080P resolution and 25 frames/second.
This camera can only be connected to compatible monitors, car radios or interfaces.
If the camera input on your monitor can only display a video signal in CVBS, FBAS or NTSC, this AHD camera is unsuitable and you should then use the identical CVBS camera with NTSC video signal.
INSTALLATION NOTE
For some vehicles, an optional relay is necessary to pick up the reversing signal.
INSTALLATION NOTE
Insert a W5W bulb into the socket provided (included in delivery).
Otherwise the brake light will be displayed as defective in the on-board computer.
Under no circumstances should you use the original W21W bulb, as the camera could be damaged by overloading.