Product information NAVLINKZ front/rear view camera interface VW, Skoda, Seat/Cupra MIB3 Entry 8.25"

 Video feeder for rear view camera, front camera with automatic and two other video sources. Suitable for VW, Skoda and Seat/Cupra with MIB3 entry all-in-one head unit with 8.25 inch monitor.
Product features
< /p>

• Video feeder for factory infotainment systems
• 1 CVBS rear view camera video input
• 1 CVBS front camera video input
• 2 CVBS video inputs for retrofit devices (e.g. USB player, DVB-T2 tuner, ...)
• Automatic switching to rear view camera input when engaging reverse gear
• Automatic front camera switching after reverse gear for 10 seconds
• Distance lines for rear view camera can be activated (not available for all vehicles)
• Image activation while driving (ONLY for fed-in video)
• Video inputs PAL and NTSC compatible

Compatibility

• Seat/Cupra Arona (KJ7) from model year 2022 with MIB3 entry infotainment with 8.25 inch monitor
• Seat/Cupra Ateca (KH7) from model year 2021 with MIB3 entry infotainment with 8.25 inch monitor
• Seat/Cupra Ibiza5 (KJ) from model year 2022 with MIB3 entry infotainment with 8.25 inch monitor
• Tarraco (KN2) from 12/2018 with MIB3 entry infotainment with 8.25 inch monitor
• Skoda Fabia 4 (PJ) from 09/2021 with MIB3 Entry - Composition Infotainment with 8.25 inch monitor
• Skoda Octavia4 (NX) from 07/2019 with MIB3 Entry - Composition Infotainment with 8.25 inch monitor
• Skoda Scala (NW1) from 01/2019 MIB3 Entry - Composition Infotainment with 8.25 inch monitor
• VW Caddy5 (SB) from 11/2020 with MIB3 Entry - Composition Infotainment with 8.25 inch monitor
• VW Golf8 (CD) from 12/2019 with MIB3 Entry - Composition Infotainment with 8.25 inch monitor

Restrictions
Input video image
In the input video image (front and rear camera, video 1 and Video 2 shows a 5mm wide black stripe on the left that cannot be hidden.
Video only
The interface does NOT feed audio signals. To feed in audio signals, an existing factory audio AUX input or an FM modulator can be used. If 2 AV sources are connected, additional electronics are required for audio switching.
Factory reversing camera
Automatic switching to RFK only as long as reverse gear is engaged. Additional electronics are required to delay the downshift.
After-market front camera
Switching to the front camera occurs automatically after disengaging reverse gear for 10 seconds. A manual switch to the front camera is also possible using the button.
Distance lines
The display of distance lines does not work in all vehicles.
NOTE:
The interface is installed in the monitor board (the monitor must be opened for this)!
Connections

• Image input: ribbon cable
• Power and CAN bus: Open cable ends
• Video inputs (2x): Cinch sockets
• Reversing camera input: RCA socket
• Front camera input: RCA socket

Technical data

• Operating voltage 12V DC (7~25V)
• quiescent current 10mA
• Current consumption 170mA
• Video input 0.7~1V
• Video input formats PAL/NTSC
• Operating temperature -40°C to +85°C
• Dimensions video box 117 x 26 x 90mm (W x H x D)
• Dimensions daughter PCB 126 x 6 x 74mm (W x H x D)