Product information Ampire BTR200-HD - Premium Bluetooth Receiver, 3.5mm jack/RCA

If you want to be able to listen to your music, audio books or navigation from your Apple iPhone or Android smartphone wirelessly via Bluetooth in maximum sound quality in the car, then the BTR series Bluetooth receivers with aptX(TM) are the solution.
You can retrofit wireless A2DP Bluetooth audio streaming to most navigation and car radio systems with the Bluetooth receiver from Ampire.
The connection is easy to set up and is automatically restored via Bluetooth.
The BTR series uses the Bluetooth protocol for headphones on your smartphone and does not affect the functionality of your Bluetooth hands-free system.
The BTR200-HD Bluetooth receiver has been developed for navigation and car radio systems with a 3.5 mm jack input and a 12 volt vehicle electrical system.

Listen to Bluetooth in CD quality with aptX(TM)?
As an alternative to standard Bluetooth, we also have receivers with the Bluetooth aptX(TM) codec.
This codec is becoming increasingly popular.
If you use devices with the aptX standard, you can significantly improve the sound quality of your Bluetooth® streams.
What does Bluetooth aptX(TM) improve?
The aptX(TM) codec uses a more efficient process for compressing audio data which makes better use of the available bandwidth.
The prerequisite for aptX(TM) streams is that both the playback device and the transmitter support Bluetooth aptX(TM).
The function can be recognized by the aptX lettering on the device. The codec supports common audio formats such as MP3 and FLAC.
Which smartphones support Bluetooth aptX(TM)?
Not all Android smartphones support the Bluetooth® codec aptX(TM).
You can check whether your Android smartphone is compatible in the technical data of your smartphone.
An Apple iPhone does not support the Bluetooth® codec aptX(TM) in principle.
CONNECTIONS

•  Audio output: 3.5mm jack plug
•  Power supply: +12V ignition (ACC/K15) with 2A fuse
•  Remote output: Blue cable +12VDC/20mA

EQUIPMENT

•  3.5mm jack plug with signal output 1.0V
•  splash-proof, marine certified
•  automatic switch-on
•  automatic remote output (+12V DC)
•  QDL licensed Bluetooth®(QCC3034)
•  A2DP in the highest EDR specification
•  aptX(TM) HD, aptX(TM), aptX(TM) Low Latency, SBC and AAC audio codec from Qualcomm®
•  BT audio streaming of lossless files such as Wave, Flac, Lossless, etc.
•  SSID display name: BTR200-HD
•  10m range

SMARTPHONE COMPATIBILITY

•  Android (Bluetooth and Bluetooth aptX(TM))
•  Apple iOS (Bluetooth)

OPTIONAL ACCESSORIES

• 55100-JACK AMPIRE interference filter

TECHNICAL DATA:

•  Voltage: +12V DC
•  Current consumption including remote output: <65mA
•  Voltage/current remote output: +12V DC, max.20mA
•  Bluetooth
•  QCC3034 chip
•  aptX(TM) HD, aptX(TM), aptX(TM) Low Latency, SBC and AAC audio codec from Qualcomm®
•  Frequency range: 20Hz-20kHz
•  Encoding: Low Complexity Subband Codec (SBC)
•  Bit rate: up to 384 kbps (48 kHz sampling)
•  Audio output voltage: 1V RMS
•  Bluetooth / transmission power <10mW EIRP and aptX
•  Dimensions of the housing: height: 20mm, width: 65mm, length: 50mm
•  Red cable: +12V (0.459mm² or 26x 0.15mm), 305mm length
•  Black cable: ground (0.459mm² or 26x 0.15mm), 305mm length
•  Blue cable +12VDC/20mA (0.459mm² or 26x 0.15mm), 305mm length

BLUETOOTH APPROVAL:

•  Declaration ID D068331
•  Referenced Qualified Design ID 173056
•  Listing Date 2024-04-18

TEACH DEVICE:

•  make sure that Bluetooth is switched on on your device
•  switch on the ignition
•  the LED (6) flashes blue (pairing mode)
•  to connect, select BTR200-HD in the Bluetooth menu of your device
•  after a successful connection, the LED lights up continuously and a single beep sounds over the audio system

NOTE:

•  up to 9 devices can be connected to the BTR200-HD, but only one device can stream music at a time
•  the BTR200X always remembers the last device that was paired and connects automatically after switching on
•  a connection to another device must be made manually, as described above
•  if the connected device is out of range for more than a minute, the connection is automatically interrupted and the BTR200-HD goes into pairing mode [the LED (6) flashes]
•  can only be used in vehicles and not in continuous operation

OPERATION:

•  all settings, such as volume, music selection and play/pause, are made on your device
•  the BTR200-HD can be installed out of sight because it has no controls or buttons that need to be operated If you want to be able to listen to your music, audio books or navigation from your Apple iPhone or Android smartphone wirelessly via Bluetooth in maximum sound quality in the car, then the Bluetooth receivers of the BTR series are the right choice with aptX(TM) the solution.
• You can retrofit wireless A2DP Bluetooth audio streaming to most navigation and car radio systems with the Bluetooth receiver from Ampire.