Emphaser ECP-M6-E2 - 16.5cm 2-way compo

Emphaser ECP-M6-E2 - 2-Way Speaker System, 16.5 cm / 6.5 inch Car Speaker, Front Sound System for Installation in Doors, 120 W RMS, 1 Pair

The 16.5 cm/6.5" ECP-M6 Edition 2 component system is the worthy successor to the legendary ECP-M6 from the MONOLITH series by EMPHASER and has been specifically optimized. With its precise, dynamic, and powerful reproduction, it remains the optimal front sound system for installation in doors and/or dashboards. This premium car speaker owes its clean, crisp bass and enormous leveling capabilities to the powerful 100 x 15 mm ferrite magnet, the heavy-duty 30 mm woofer coil, and the 6 mm thick, flat-milled pole plate of the The woofer's aluminum-paper compound cone combines high damping and rigidity with a direct step response typical of hard cones for extremely precise and detailed music reproduction. The cone thickness provides the stability for powerful bass attacks and the necessary lightness for high-resolution and natural-sounding mids. The durable butyl surround in the M design ensures that the ECP-M6-E2 performs precisely even at high levels and thus high cone excursions. The tweeter with a 25 mm aluminum cone reproduces accurately and with attention to detail up to 40 kHz. The dome geometry offers a uniform directional characteristic for excellent sound in a wide variety of installation situations. In addition to the low weight of the cone, surround, and voice coil, the deliberate omission of Feðrrðofluid is primarily responsible for the tweeter's very lively, spacious, and coloration-free sound. plays.

The minimalist design of the Emphaser FlowMax die-cast aluminum basket supports the carefully selected components. The very open construction with its delicate struts provides maximum freedom of movement for the rearward-radiated sound and ensures a minimum of unwanted reflection surfaces that can influence the sound. Despite the delicate construction, the sophisticated basket design offers enormous stability. Another innovation is the EMPHASER screw terminal: Although very solid, it requires very little space and, with its force-locking connection using solid hexagon screws and gold-plated contact surfaces, ensures reliable signal transmission.

For increased installation convenience, the crossovers have been divided into four separate housings for the tweeter and woofer sections. This allows for easy installation in the original installation location. The crossover components have a high Q factor to influence the music signal as little as possible. Especially in the direct signal path, only air coils, film capacitors, and MOX resistors are used. used. The two-stage tweeter level adjustment is done via a solid jumper.

Main Features

Main Features Woofer

• 16.5 cm / 6.5" Mid-Woofer
• EMPHASER FlowMax die-cast aluminum basket
• 100 x 15 mm strontium ferrite magnet
• Aluminum-paper composite cone with inverted aluminum dust cap
• Durable M-design butyl surround for low distortion even at high excursions
• 6 mm thick, Flat-milled pole plate with Faraday copper ring for a stable magnetic field
• Two-layer copper wire voice coil, wound on a temperature-resistant aluminum voice coil former
• Durable, rear-ventilated Connex spider with woven voice coil lead
• Gold-plated screw terminal

Main features of the tweeter

• 25 mm aluminum dome with neodymium magnet
• CNC-milled aluminum housing with shallow installation depth
• Protective grille with very large Opening area for high sound transmission and low reflections
• Surface-mounted enclosure for installation in two different dispersion angles

Main features: Crossover

• 6 dB/oct. woofer / 12 dB/oct. Tweeter Filter
• Two-stage level adjustment for the tweeter
• Fiberglass EPOXY Circuit Board
• Separate crossover housings for tweeter and woofer for optimal installation convenience, no mutual interference between the two signal paths due to chokes that are too close together
• Use of high-quality air-core coils, MKP capacitors, and MOX resistors in the direct signal path
• Gold-plated connection terminal

Scope of delivery

• 2 x Woofer
• 2 x Tweeter
• 4 x Crossover
• 2 x Enclosure Adapters with Two Mounting Brackets
• Speaker Grille Optional: ESP-GR6

Technical Specifications

• Nominal Power Handling: 120 W RMS
• Impedance: 4 Ohms
• Frequency Response: 60 Hz - 40 kHz
• Sensitivity: 90 dB
• Installation diameter: 145 mm
• Installation depth: 64 mm