Audison AV due - 2-Kanal Verstärker

Audison AV due - 2-channel amplifier

900 W POWER AMPLIFIER

AV due is a powerful stereo amplifier.
The power supply and power amp, which also operate in mono and tri-mode, ensure a very high output current of up to 900W (RMS).
AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user via 4 different colored LEDs located on the top; ART (Automatic Remote On / Off) allows automatic on / off switching when no remote signal is available from the source.

Specifications:

• Power supply:11 ÷ 15 VDC
• No-load current:1.7 A
• off:0.02 mA
• Power consumption at max. Musikleistung at14.4V:65 A
• Fuse (Fuse):60 A
• Dimensions mm:220 mm x 470 mm x 58 mm
• Weight:7.2 kg

Amplifier characteristics:

• Distortion - THD (1kHz at 4 Ohm):0.04%
• Bandwidth (-3 dB):4 ÷ 60k Hz
• S / N Ratio (A weighted at 1V):100 dBA
• Damping factor (1k Hz at 4 Ohm):120
• Remote Input:7 ÷ 15 VDC - 1mA
• Remote output voltage:12 VDC - 50mA
• Remote SUB volume adj. (with low pass 24 dB): (-50 · 6) dB
• Speakers IN Turn-on (ART): Selectable
• Input sensitivity: 0.3 ÷ 5 V RMS
• Input Impedance:15k Ohm
• Speaker-In sensitivity:1.4 ÷ 24 V RMS
• Speaker-In impedance: 5k Ohm
• Minimum Load Impedance: 2 Ohm
• Power Rating (RMS) at 12 VDC, 0.3% THD, 4 Ohm: 210 W x 2
• Output power (RMS) at 14.4 VDC, THD 1%:

            2 Ch 260 W x 2 (4 Ohm)

            2 Ch:450 W x 2 (2 Ohm)

           1 Ch 900 W x 1 (4 Ohm)

CEA specifications:

• Output power at 4 Ohm, 1% THD + N, 14.4 V:260 W x 2 ch
• SN ratio (ref. 1 W output):80 dBA

Signal input / filter:

• Inputs:Pre IN / IN Speakers
• Outputs:Pre OUT fullrange
• Filters (Full / Hi-pass / low pass):
• 50 ÷ 5k Hz (2-range) at 12 dB / Oct.
• Filter (low pass 24 dB mono):
• 50 ÷ 500 Hz at 24 dB / Oct.