Audison AV 5.1k - 5-Kanal Verstärker

Audison AV 5.1k - 5-channel amplifier

1650 W POWER AMPLIFIER

AV 5.1k, 1650 W (RMS) max, five channels: With its hybrid design, it is the special amplifier for front + rear + subwoofer or multi-amplified front + subwoofer systems.
The high-quality AB-Class output stage features two channels of 250W (RMS) combined with another pair of 75W (RMS) class A audio channels, ideal for active two-way front speakers.
The mono section of the D-Class offers 1000 W (RMS) for efficient and powerful subwoofer output. AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user via 4 different colored LEDs located on the top; ART (Automatic Remote On / Off) allows automatic on / off switching when no remote signal is available from the source.

Specifications:

• Power supply: 11 ÷ 15 VDC
• No-load current: 3 A
• off: 0.02 mA
• Power consumption at max. Musicpower at 14.4 V: 110 A
• Fuse (Fuse): 100 A
• Dimensions: 220 mm x 470 mm x 58 mm
• Weight: 7.2 kg

Amplifier characteristics:

• Distortion - THD (1k Hz at 4 Ohm) A, B Ch: 0.05%
• Distortion - THD (100 Hz at 4 Ohm), C (sub) Ch: 0.3%
• Bandwidth (-3 dB) A, B Ch: 4 ÷ 60k Hz
• Bandwidth (-3 dB) C (sub) Ch: 7 ÷ 350 Hz
• S / N Ratio (A weighted at 1V) A, B, Ch: 100 dB
• S / N Ratio (A weighted at 1V) C (sub) Ch: 87 dB
• Damping factor (1k Hz at 4 Ohm) A, B, Ch:100
• Damping Factor (100 Hz at 4 Ohm) C (sub) Ch:80
• Remote Input: 7 ÷ 15 VDC - 1mA
• Remote output voltage: 12 VDC - 50mA
• Remote SUB adj volume: (-50 ÷ 6) dB
• Speakers IN Turn-on (ART): Selectable
• Input sensitivity: 0.3 ÷ 5 V RMS
• Input Impedance:15k Ohm
• Speaker-In sensitivity: 1.4 ÷ 24 V RMS
• Speaker-In impedance:5k Ohm
• Minimum load impedance A / B / C Ch: 4 Ohm / 2 Ohm / 2 Ohm
• Power Rating (RMS) A + B + C Ch at 12 VDC,
• 0.3% THD, 4 Ohm: 50W x 2 + 120W x 2 + 500W x 1

Output power (RMS) A + B + C Ch at 14.4 VDC, THD 1%: 

• 5 Ch: 75 W x 2 (4 Ohm) + 140 W x 2 (4 Ohm) + 600 W x 1 (4 Ohm)   
• 5 Ch: 75 W x 2 (4 Ohm) + 140 W x 2 (4 Ohm) + 1000W x 1 (2 Ohm)
• 5 Ch: 75 W x 2 (4 Ohm) + 250 W x 2 (2 Ohm) + 1000W x 1 (2 Ohm)

CEA specifications:

• Output power at 4 Ohm, 1% THD + N, 14.4 V:
• 75 W x 2 + 140 W x 2 + 600 W x 1
• SN ratio (ref. 1W output):
• 75 W channels:80 dBA
• 140 W Channels:80 dBA
• 600 W Channels:78 dBA

Signal inputs / filter

• Inputs:Pre IN / IN Speakers
• Outputs:Pre OUT fullrange
• A Ch filter (Full / Hi-Pass):
• 50 ÷ 5k Hz (2-range) at 12 dB / Oct.
• B Ch filter (Full / Hi-pass / Band-pass):
• 50 ÷ 1k Hz (Hi) / 250 ÷ 5k (Lo) at 12 dB / Oct.
• C Ch filter (full / low pass):50 ÷ 150 Hz at 24 dB / Oct.