5% discount
Prices incl. VAT plus shipping costs
Ready to ship,
Delivery time appr. 1-3 Workdays
- Order number: 02055M118003
- EAN 4057204612672
MATCH PP 86DSP MK2
Plug & Play Power for multi-channel factory sound systems
The MATCH PP 86DSP MK2 seamlessly follows on from the successful concept of its predecessor, but brings with it some upgrades. As a powerful 8-channel power amplifier with 1-channel line output and integrated 9-channel DSP with 64 bit power, it is perfect for audiophile upgrades to multi-channel factory sound systems and conveniently creating an impressive sound experience.
Seamless connection and impressive connectivity
The MATCH Plug & The Play concept stands for seamless connection to factory systems, which has been implemented without compromise in the PP 86DSP MK2: its impressive 2-ohm stability on all amplifier channels makes it possible to connect almost all OE speakers without any problems, while optional cable harnesses enable integration into existing multi-channel -Factory sound systems make it much easier. In addition, the MATCH PP 86DSP MK2 is characterized by its extended connectivity: In addition to the intelligent 6-channel high-level input with ADEP.3 circuit, the PP 86DSP is equipped with a MEC slot for expansion with additional interfaces, such as Bluetooth span>® Audio streaming. There is also a 1-channel line output for connecting other amplifiers such as the MATCH UP 1FX as well as the optical SPDIF input with a sampling rate between 12 and 96 kHz . Of course, the SCP port is also available for optional accessories, such as DIRECTOR, CONDUCTOR etc. Included.
Virtual Channel Processing - this is how signal routing works today
Optimal adaptation to existing multi-channel sound systems makes sensible management and configuration of the many DSP channels in the amplifier essential - Therefore, there was no question that the PP 86DSP MK2 was also equipped with Audiotec Fischer's innovative Virtual Channel Processing.
Especially when the front, rear and center systems are broken down into different active multi-way systems, you come across conventional routing -Concepts quickly reach their limits both in terms of implementation and usability. The multi-stage "Virtual Channel Processing", in conjunction with the recognized user-friendly DSP PC tool software, makes it possible to easily map even highly complex system configurations and to freely assign our proprietary FX sound features.
In addition, the PP 86DSP MK2 is thanks to its generous number of channels, in conjunction with the optional MEC ANALOG IN Module, also an ideal candidate for applications , where 1 to 1 routing (IOR) is required.
ACO – Advanced 32 Bit CoProcessor Platform
The PP 86DSP MK2 is of course with the proprietary 32 Bit ACO platform equipped - this not only takes over all control tasks ultra-fast, but above all offers a whole bundle of audio functions: Fantastic sound effects such as Augmented Bass Processing or RealCenter are implemented as well as a channel-separated input EQ including input signal analyzer (ISA) for easy analysis and compensation of the input signals from OE radios that already include a sound setup ex works.
DSP PC-Tool 5 feat. TuneEQ - Powerful features for ultimate sound experiences
Of course, the PP 86DSP MK2 has our professional and at the same time exceptionally intuitive DSP PC-Tool 5 configurable. The familiar, numerous setting options leave nothing to be desired and guarantee extremely precise sound adjustment, even with complex system configurations. And thanks to the proprietary TuneEQ function for automated frequency response correction, you also save a lot of time when tuning your sound.
Features
- Powerful 8-channel amplifier with 1-channel line output and integrated 9-channel DSP < li>Perfect for upgrading multi-channel factory sound systems
- 2 ohm stability on all amplifier channels - therefore easy connection to almost all OE speakers
- Optional cable harnesses for easy integration into existing multi-channel -Factory sound systems
- Extremely powerful 64 bit “Fixed Point” audio DSP
- ACO – Advanced 32 bit CoProcessor platform for extended functionality
- ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
- Proprietary TuneEQ function for automated adjustment of the output equalizers
- SFX sound effects – Augmented Bass Processing, RealCenter & Co.
- Intelligent 6-channel high-level input with ADEP.3 circuit and adjustable input sensitivity from 5 to 11 volts
- VCP (Virtual Channel Processing) enables highly complex sound systems can be configured even more flexibly
- MEC slot for system expansions such as Bluetooth® HD audio streaming, high resolution audio streaming via USB etc.
- Optical SPDIF input with a sampling rate between 12 and 96 kHz
- 1-channel line output for connecting additional amplifiers such as the subwoofer amplifier MATCH UP 1FX
- SCP (Smart Control Port) for optional accessories, such as DIRECTOR, CONDUCTOR & Co.
- Start-stop capable power supply with extended input voltage range up to 18 V - ideal for modern electric vehicles
- Auto Remote Switch
- 1:1 IOR (Input -to-Output Routing) in conjunction with the optional MEC ANALOG IN Module - same number of high-level inputs and amplifier channels
- Very compact dimensions and low heat generation thanks to very high efficiency
Special features:
Class HD technology
The PP 86DSP MK2 combines the advantages of Class H technology with the principle of a Class D amplifier. The result is unsurpassed efficiency that even exceeds conventional Class D amplifiers. The Class HD concept shows its advantages at low and medium levels, as the power supply regulates the internal supply voltage of the power stages depending on the amplitude of the input signal. This drastically reduces the average power loss generated by the amplifier.
ACO – Advanced 32 Bit CoProcessor
The MATCH PP 86DSP MK2 amplifier uses a particularly powerful Latest generation 32 bit CoProcessor. This not only takes over all control tasks ultra-fast, but also lightning-fast switching between up to ten possible sound setups. < br />But ACO offers much more - in addition to a channel-separated input EQ including an Input Signal Analyzer (ISA) for easy analysis and compensation of the input signals from OE radios and fantastic sound effects such as Augmented Bass Processing or RealCenter There is now the revolutionary TuneEQ function for automatically setting the output equalizer.
Another significant advantage is the CoProcessor's integrated, native bootloader. This enables software upgrades of all components of the DSP, for example in order to be able to adapt the microcontroller-controlled ADEP.3 circuit to future changes in diagnostic systems of factory radios or to expand the device with additional interfaces.< nonbreakingspace/>
Intelligent high-level input ADEP.3
Modern, factory-installed car radios are becoming increasingly intelligent when it comes to diagnosing the connected speakers. The latest generation in particular is equipped with additional monitoring functions, so that error messages or even malfunctions can occur when an additional amplifier is connected. The new ADEP.3 circuit (Advanced Diagnostics Error Protection Generation 3) prevents these problems without unnecessarily loading the radio's speaker outputs at high levels.
Start-stop capability
The power supply in PP 86DSP MK2 amplifier ensures the internal power supply even during short-term drops down to 6 volts. This ensures that the amplifier remains fully functional even when the engine is started. If the on-board voltage falls below 10.5 volts for longer than 5 seconds, the amplifier goes into “Protect Mode” (status LED lights up red permanently) to prevent further battery discharge.
Automatic Digital Signal Detection
The PP 86DSP MK2 allows signal-controlled switching between the analog and digital inputs. As soon as an audio signal is detected at the optical input, the amplifier switches to this input. This function can be activated in the DSP PC-Tool software or alternatively manual control can be selected using an optionally available remote control.
Power Save Mode
The Power Save mode allows the power consumption to be reduced of the PP 86DSP MK2 (and any additionally connected amplifier) if there is no input signal for longer than 60 seconds. As soon as the “Power Save Mode” is active, the internal amplifier stages of the PP 86DSP MK2 as well as the remote output are switched off, thus significantly reducing the power consumption. The amplifier returns to normal operating mode within 2 seconds as soon as a music signal is present at its input. About the DSP PC tool Software, the switch-off delay can be varied or . must be completely deactivated.
Note: The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. and any use of these marks by Audiotec Fischer GmbH happens under license. Other trademarks and trade names belong to their respective owners.
DSP Features
TuneEQ
TuneEQ is an extremely flexible and particularly easy-to-use function for automated frequency response correction. A single measurement per respective audio channel or channel pair with a suitable measurement microphone (such as our MTK1) is enough for TuneEQ to independently and precisely adapt the equalizer to the desired reference curve. TuneEQ uses the full range of functions of the parametric equalizer, including the center frequency, the Q factor and the gain. And because the highly complex calculation operations required for this take place in the background, you also save a lot of time when tuning sound with TuneEQ.
RealCenter
The “RealCenter” function is a proprietary one Audiotec Fischer algorithm that highlights the monaural information of the left and right front channels to create a unique center signal. In contrast to usual methods in which the channels are simply summed up, here there is also dynamic control of the center signal through the stereophonic information content of the left and right channels. This means that the center channel does not reproduce a signal if only the left or only the right channel delivers an audio signal. With usual algorithms, the center channel would only be 6 dB quieter in this case. Audiotec Fischer's “RealCenter” enables a unique, wide-ranging stage image - and is optimal for driver and passenger alike! The disadvantages of a conventional center channel, such as an intrusive, narrow spatial sound representation, are finally a thing of the past.
Augmented Bass Processing
Audiotec Fischer's proprietary “Augmented Bass Processing”, consisting of the two revolutionary sound features: “Dynamic Bass Enhancement” and “SubXpander”. These have been specially developed to dramatically improve the bass reproduction of subwoofers.
"Dynamic Bass Enhancement" ingeniously combines maximum deep bass foundation and high maximum sound pressure - regardless of the type of music you are listening to or the sound settings on the radio. Depending on the input signal, “Dynamic Bass Enhancement” amplifies the lower frequency range on the one hand and varies the cutoff frequency of the subsonic filter on the other. The result is a much more powerful, deeper bass reproduction at low and medium volumes without the risk of mechanically or electrically overloading the subwoofer at high volumes. It's simply fascinating what bass performance is suddenly possible.
If you want the low frequency range to be a little deeper and "blacker", you can also activate the "SubXpander". Here, additional subharmonic tones are mixed into the basic tones in the frequency range between 50 and 100 Hz.
Technical data< /h3>
| Performance RMS | |
| - @ 4 Ohm | 8 x 55 Watt |
| - @ 2 Ohm | 8 x 70 Watt |
| - @ 1 ohm | - |
| - bridged to 4 ohms | - |
| - bridged to 2 ohms | - |
| - Subwoofer output at 4 ohms | - |
| - Subwoofer output at 2 ohms | - |
| Amplifier technology | Class HD |
| Inputs | 6 x high level speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x MEC 1 x Remote In |
| Input sensitivity | High level 5 - 11 volts |
| Input impedance RCA | - |
| Input impedance high level | 9 - 33 ohms with ADEP.3 |
| Outputs | 8 x speaker output 2 x RCA (mono) 2 x Remote Out |
| Output voltage RCA | 3 Volt RMS |
| Frequency range< /strong> | 20 Hz - 22,000 Hz |
| DSP resolution | 64 bit |
| DSP computing power | 295 MHz (1.2 billion MAC operations/second) |
| Sample rate | 48 kHz |
| DSP type | Audio signal processor |
| Signal converter | A/D: BurrBrown D/A: BurrBrown |
| Signal/noise ratio digital input | 105 dB (A-weighted) |
| Signal / noise ratio analog input | 103 dB (A-weighted) |
| Total harmonic distortion (THD) | < 0.015% |
| Damping factor | > 100 |
| Operating voltage | 10.5 - 18 volts (max. 5 seconds down to 6 volts) |
| Power consumption | DC 12 V ⎓ 40 A max. |
| < strong>No-load current consumption | 685 mA |
| Max.remote output current | 500 mA |
| Ambient temperature range for operation | -40° C to +70° C |
| Fuse | 2 x 25 A LP mini plug-in fuse |
| Additional features< /strong> | Class HD technology with dynamically controlled power supply, 32 bit CoProcessor, ADEP.3 circuit, Smart Control Port, start-stop capability, USB, MEC slot, auto remote switch, galvanic separate line outs |
| Dimensions (H x W x D) | 44 x 185 x 164 mm |
Scope of delivery
1 x MATCH Plug & Play amplifier PP 86DSP MK2
3 x connection cable
1 x mounting material
1 x USB cable
1 x operating instructions
| quantity: | 1 piece |
| Cinch Output: | 1 pair |
| Housing color: | black |
| High Level Inputs: | 3 Paar |
| Impedance (in Ohm): | 2,0, 4,0 |
| Channels: | 8 |
| Speaker Outputs: | 8 |
| Peak Power (in Watt): | 1120 |
| Power RMS (in Watt): | 560 |
| Product group: | Amplifier |
| Amplifier Features: | bass remote (optional), digital, integrated DSP, High-Level-Input |
