JL Audio XDM1000/5 - 5-channel amplifier for car and marine

JL Audio XDM1000/5 

Powerful, Compact, Incredible Value 

Thanks to NexD technology, XDM amplifiers achieve an overall efficiency of over 80%. This results in lower energy consumption and thus protects your electrical system.

Technical Specifications

General

• Monoblock 5 Channels
• Physical Dimensions (Height) 2.05" (52 mm)
• Dimensions (Width) Monoblock 5 (700 W)/6-Channel: 10.23" (260 mm)
• Physical Dimensions (Depth) 7.09" (180 mm)
• Weight
• 5-Channel (700 W): 6.15 lbs (2.79 kg)
• Warranty 3 Years
• Operating Voltage 11-14.5 VDC (12 V models)

Audio

• Amplifier Class Class D
• Rated Continuous Power (RMS) (14.4 V input at 4 ohms < 1% THD)
• 5-Channel (700 W): Main: 75 W x 4 / Sub: 180 W x 1
• 5-Channel (1000 W): Main: 75 W x 4 / Sub: 400 W x 1

• Rated Continuous Power (RMS) (14.4 V input at 2 ohms < 1% THD)
• 5-Channel (700 W): Main: 100 W x 4/Sub: 300W x 1
• 5-Channel (1000W): Main: 100W x 4/Sub: 600W x 1

• Rated continuous power (RMS) (12.5V input at 4 ohms < 1% THD)
• 5-Channel (700W): Main: 60W x 4/Sub: 180W x 1
• 5-Channel (1000W): Main: 60W x 4/Sub: 360W x 1

• Rated continuous power (RMS) (12.5V input at 2 ohms < 1% THD)
• 5-Channel (700W): Main: 90W x 4/Sub: 300 W x 1
• 5-channel (1000 W): Main: 90 W x 4 / Sub: 600 W x 1

• Signal-to-noise ratio, referred to the highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - Main channels 3/5-channel: > 104 dB
• Signal-to-noise ratio, referred to the highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - Subwoofer channel 3/5-channel: > 103 dB
• Signal-to-noise ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - Main channels 3/5-channel: > 84 dB
• Signal-to-noise ratio, relative to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - Subwoofer channel 3/5-channel: >83 dB
• Damping factor at 4 Ω monoblock (300 W): 2/4/5/6-channel: >150/50 Hz
• Damping factor at 2 Ω monoblock (300 W): 2/4/5/6-channel: >75/50 Hz

• THD+N at rated power: Main channels 3/5-channel (700 W/1000 W): <1% at 2 Ω per channel
• THD+N at rated power: Subwoofer channel 3/5-channel (700 W/1000 W): <1% at 2 Ω per channel
• Frequency response (+0, -1 dB): Main channels 3/5-channel (700 W/1000 W): 12 Hz-22 kHz
• Frequency response (+0, -1 dB): Subwoofer channel 3/5-channel (700 W/1000 W): 10 Hz-1 kHz
• Fuse rating monoblock (300 W): 5-channel (700 W): 60 A
• Recommended fuse types AFS, AGU or MaxiFuse™

Signal processing

• Filter mode(s): 3/5-channel (700 W/1000 W): Off or high-pass only
• Filter slope(s): Channels 1 and 2 monoblock (300 W/600 W/1000 W): 5-channel (700 W/1000 W): 50 Hz–5 kHz
• Filter mode(s): 5-channel (700 W/1000 W): Off, high-pass, or band-pass
• Filter slope(s): Channels 3 and 4 4/5 (700 W)/6-channel: 12 dB/octave
• Filter frequency range: Channels 3 and 4 4/5 (700 W)/6-channel: 50 Hz–500 Hz
• Filter mode(s): Channels 5 and 6 6-channel: Off, low-pass, or high-pass
• Filter slope(s): Channels 5 and 6 6-channel: 12 dB/octave
• Filter frequency range: Channels 5 & 6 6-channel: 50 Hz-500 Hz
• Filter mode(s): Subwoofer channel 3/5-channel (700 W/1000 W): Off or low-pass only
• Filter slope(s): Subwoofer channel 3/5-channel (700 W/1000 W): 12/24 dB/octave
• Filter frequency range: Subwoofer channel 3/5-channel (700 W/1000 W): 50 Hz-500 Hz
• Detented, calibrated filter frequency potentiometers
• Infrasonic filter: Subwoofer channel monoblock (600 W): 30 Hz, switchable
• Remote fill level control: Optional HD-RLC or MHD-RLC (water-resistant)
• Remote Level Modes 3/5-Channel (700 W/1000 W): All Channels or Subchannels
• Channel Input Mode Switch 3/4-Channel: Yes (2/4 Channels)
• 5-Channel (700 W/1000 W): Yes (2/4/6 Channels)
• Pass-Through Preamp Output Monoblock (300 W/600 W)/2/3/4-Channel: Buffered
• Source Channel Selection for PreOuts 3/5-Channel (700 W/1000 W): Yes (1 & 2 / Sum / Sub)
• 4-Channel: Yes (1 & 2 / Sum)