JL Audio XDM600/6 - 6-channel amplifier for car and marine

JL Audio XDM600/6 

Powerful, Compact, Incredible Value

Thanks to NexD technology, XDM amplifiers achieve an overall efficiency of over 80%. This results in lower energy consumption and thus protects your electrical system.

Technical Specifications

General

• Channels: 6
• Physical Dimensions (Height): 2.05" (52 mm)
• Dimensions (Width): Monoblock 5 (700 W)/6-Channel: 10.23" (260 mm)
• Physical Dimensions (Depth): 7.09" (180 mm)
• Weight: 6-Channel: 5.8 lbs (2.63 kg)
• Warranty: 3 Years
• Operating Voltage: 11–14.5 VDC (12 V models)

Audio

• Amplifier Class: Class D
• Rated Continuous Power (RMS) (14.4 V input at 4 ohms <1% THD)
• 6-Channel: 75 W x 6/200 W x 3 (Bridged)
• Rated Continuous Power (RMS) (14.4 V input at 2 ohms <1% THD)
• 6-Channel: 100 W x 6
• Rated Continuous Power (RMS) (12.5 V input at 4 ohms <1% THD)
• 6-Channel: 60 W x 6/180 W x 3 (Bridged)
• Rated Continuous Power (RMS) (12.5 V input at 2 ohms <1% THD)
• 6-channel: 90 W x 6

• Signal-to-noise ratio, referred to the highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): 2/4/6-channel: >104 dB
• Signal-to-noise ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): 2/4/6-channel: >84 dB
• Damping factor at 4 Ω 2/4/5/6-channel: >150/50 Hz
• Damping factor at 2 Ω 2/4/5/6-channel: >75/50 Hz
• THD+N at rated power monoblock (300 W/600 W)/2/4/6-channel: <1% at 2 Ω per channel
• Frequency response (+0, -1 dB) 2/4/6-channel: 12 Hz–22 kHz
• Input voltage range @ RCA inputs monoblock (300 W/600 W/1000 W)/2/3/4-channel: 200 mV – 4 V RMS
• Fuse rating monoblock (300 W): 6-channel: 50 A
• Recommended fuse types AFS, AGU or MaxiFuse

Signal Processing

• Filter Mode(s): Channels 1 and 2, 2/4/6-Channel: Off, Low-Pass, or High-Pass
• Filter Slope(s): Channels 1 and 2, 2/3/4/5 (700 W/1000 W)/6-Channel: 12 dB/Octave
• Filter Frequency Range: Channels 1 & 2, 2/3/4/6-Channel: 50 Hz–500 Hz
• Filter Mode(s): Channels 3 and 4, 4/6-Channel: Off, Low-Pass, or High-Pass
• Filter Slope(s): Channels 3 and 4, 4/5 (700 W)/6-Channel: 12 dB/Octave
• Filter Frequency Range: Channels 3 and 4 4/5 (700 W)/6-Channel: 50 Hz-500 Hz
• Filter Mode(s): Channels 5 and 6 6-Channel: Off, Low-Pass, or High-Pass
• Filter Slope(s): Channels 5 and 6 6-Channel: 12 dB/Octave
• Filter Frequency Range: Channels 5 & 6 6-Channel: 50 Hz-500 Hz
• Filter Mode(s): Subwoofer Channel 3/5-Channel (700 W/1000 W): Off or Low-Pass Only
• Filter Slope(s): Subwoofer Channel 3/5-Channel (700 W/1000 W): 12/24 dB/Octave
• Filter Frequency Range: Subwoofer Channel 3/5-Channel (700 W/1000 W): 50 Hz-500 Hz
• Detented, calibrated filter frequency potentiometers
• Remote level control: Optional HD-RLC or MHD-RLC (water-resistant)
• Channel input mode switch: 3/4-channel: yes (2/4 channels)
• Pass-through preamp output: monoblock (300 W/600 W)/2/3/4-channel: buffered
• 4-channel: yes (1&2/sum)