JL Audio XDM700/5 - 5-channel amplifier for car and marine

JL Audio XDM700/5

Powerful Compact Incredible Value

Thanks to NexD technology, XDM amplifiers achieve an overall efficiency of over 80%. This results in lower energy consumption and thus protects your electrical system.

Technical Specifications

General

• Channels 5
• Physical Dimensions (Height) 2.05" (52 mm)
• Dimensions (Width) 5 (700 W)/6-Channel: 10.23" (260 mm)
• Physical Dimensions (Depth) 7.09" (180 mm)
• Weight 5-Channel (700 W): 6.15 lbs (2.79 kg)
• Warranty 3 Years
• Operating Voltage 11–14.5 VDC (12 V models)

Audio

• Amplifier Class: Class D
• Rated Continuous Power (RMS) (14.4 V input at 4 ohms <1% THD)
• 5-Channel (700 W): Main: 75 W x 4 / Sub: 180 W x 1
• Rated Continuous Power (RMS) (14.4 V input at 2 ohms <1% THD)
• 5-Channel (700 W): Main: 100 W x 4 / Sub: 300 W x 1
• Rated Continuous Power (RMS) (12.5 V input at 4 ohms <1% THD)
• 5-Channel (700 W): Main: 60 W x 4/Sub: 180 W x 1
• Rated continuous power (RMS) (12.5 V input at 2 ohms <1% THD)
• 5-channel (700 W): Main: 90 W x 4/Sub: 300 W x 1

• Signal-to-noise ratio, referred to the highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - Main channels 3/5-channel: >104 dB
• Signal-to-noise ratio, referred to the highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - Subwoofer channel 3/5-channel: >103 dB
• Signal-to-noise ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - main channels 3/5-channel: > 84 dB
• Signal-to-noise ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog inputs - subwoofer channel 3/5-channel: > 83 dB
• Damping factor at 4 Ω 2/4/5/6-channel: > 150/50 Hz
• Damping factor at 2 Ω 2/4/5/6-channel: > 75/50 Hz
• THD+N at rated power: Main channels 3/5-channel (700 W/1000 W): <1% at 2 Ω per channel
• THD+N at Rated Power: Subwoofer Channel 3/5-Channel (700 W/1000 W): <1% at 2 Ω per channel
• Frequency Response (+0, -1dB): Main Channels 3/5-Channel (700 W/1000 W): 12 Hz-22 kHz
• Frequency Response (+0, -1dB): Subwoofer Channel 3/5-Channel (700 W/1000 W): 10 Hz-1 kHz
• Fuse Rating 5-Channel (700 W): 60 A
• Recommended Fuse Types: AFS, AGU, or MaxiFuse

Signal Processing

• Filter Mode(s): 3/5-Channel (700 W/1000 W): Off or only High Pass
• Filter Slope(s): 2/3/4/5 (700 W/1000 W)/6-Channel: 12 dB/Octave
• Filter Frequency Range: 5-Channel (700 W/1000 W): 50 Hz–5 kHz
• Filter Mode(s): 5-Channel (700 W/1000 W): Off, High Pass, or Band Pass
• Filter Slope(s): Channels 3 and 4 4/5 (700 W)/6-Channel: 12 dB/Octave
• Filter Frequency Range: Channels 3 and 4 4/5 (700 W)/6-Channel: 50 Hz–500 Hz
• Filter Mode(s): Channels 5 and 6 6-Channel: Off, Low Pass, or High Pass
• Filter Slope(s): Channels 5 and 6, 6-Channel: 12 dB/Octave
• Filter Frequency Range: Channels 5 & 6, 6-Channel: 50 Hz-500 Hz
• Filter Mode(s): Subwoofer Channel 3/5-Channel (700 W/1000 W): Off or Low Pass Only
• Filter Slope(s): Subwoofer Channel 3/5-Channel (700 W/1000 W): 12/24 dB/Octave
• Filter Frequency Range: Subwoofer Channel 3/5-Channel (700 W/1000 W): 50 Hz-500 Hz
• Detented, calibrated filter frequency potentiometers
• Remote Level Control: Optional HD-RLC or MHD-RLC (water-resistant)
• Remote Level Modes 3/5-Channel (700 W/1000 W): All Channels or Subchannels
• Channel Input Mode Switch 3/4-Channel: Yes (2/4 Channels)
• 5-Channel (700 W/1000 W): Yes (2/4/6 Channels)
• Source Channel Selection for PreOuts 3/5-Channel (700 W/1000 W): Yes (1&2/Summary/Sub)
• 4-Channel: Yes (1&2/Summary)