Retro Sound MOTOR-2DAB - radio module (FM/DAB+) including installation material and wiring

Retro sound radio module (FM/DAB+) including installation material and wiring

The article "MOTOR-2DAB" is the radio module with all cables and accessories but without the display unit. The display unit, the control knobs and the rear control rings must be ordered separately.

It has a Bluetooth hands-free system with A2DP audio streaming. Of course, the "MOTOR-2DAB" radio module also has the flexible "InfiniMount" fastening system and control knob patented by RetroSound. With this device you get the design of your classic and don't have to do without modern digital media. Two USB and two AUX inputs on the back of the device allow you to play external audio players.

Any concerns that your H license plate might be in danger by installing a RetroSound car radio are unfounded. In the download you will find a confirmation with the approval of the entire AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Model Zuma" and the RetroSound Model Two" including vehicle-specific panel and control buttons may be installed in classic cars with an H license plate or do not prevent the issuing of the H license plate!

EQUIPMENT

• Playback of MP3 and WMA files via the rear USB input
• Bluetooth speakerphone with A2DP audio streaming
• Adjustable LCD lighting with 32,000 different colors
• DAB+/FM/MW radio receiver with RDS and 30 station memory
• Tuner with European odd and even radio frequencies
• Integrated 4-channel amplifier (4 x 25 watts RMS)
• 2 stereo cinch outputs for external amplifiers (front/rear)
• 3 equalizer programs plus individual bass/treble/fader/balance settings
• XBAS loudness function
• Persistent Storage

OPTIONS FOR EXPANSION

• 1 USB inputs (rear of device) up to max. 32GB
• 1 AUX input (3.5mm jack, stereo on the back of the device)
• 2 cinch outputs (stereo) for external amplifiers (front/rear)
• Separate switch-on line for motor antenna and amplifier

TECHNICAL DATA RADIO PART

• DAB+ reception via SMB antenna input for passive DAB+ antennas
• FM European broadcasting Frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
• MW frequency range 530-1710 kHz (9 kHz. in steps)

SCOPE OF DELIVERY

• Radio basic module with FM/DAB+ receiver
• Main Wiring Harness
• ISO connection cable (power & speaker wiring harness)
• Screws and fastening material
• Microphone for the Bluetooth hands-free function
• Spacers
• Mounting plate with accessories
• -Mounting brackets

GENERAL DATA

• Dimensions radio base unit 101x51x136mm
• Power supply 10.5 to 14.4 volts
• Maximum power consumption 15 amps
• Quiescent current 3.5 mA
• Output power 12V, 4 ohms, <1% distortion: 4x25 watts (RMS)
• Speaker impedance 4-8 ohms
• Cinch outputs 4-channel 2.85 volts for external amplifiers (front/rear)
• Input sensitivity AUX1 >300 mV / 6 kOhm
• Input sensitivity AUX2 >300 mV / 6 kOhm

E-APPROVED

1. E-approval e13 03 10006 e13*72/245*2006/96*10006*00

VEHICLES WITH 6 VOLT ON-BOARD NETWORK
You need a voltage converter if you want to operate a RetroSound car radio in a vehicle with 6 volt on-board network. In such a case, we recommend the DC/DC converter 2238.0 from Statron (www.statron.de).

*IMPORTANT NOTE
< span>Please order the display unit and control buttons for your car separately. These are not included in the scope of delivery of the car radio.

COMPATIBLE DISPLAY UNITS

• APACHE
• DETROIT
• GRAND PRIX
• HUNTINGTON
• MONTEREY
• NEW YORK
• NEWPORT
• REDONDO-RS
• RETRO-RADIO-B
• RETRO-RADIO-BC
• RETRO-RADIO-C
• RETRO-RADIO-CB
• RETRO-RADIO-IVO
• SANTA CRUZ
• WONDERFUL WB1
• WONDERFUL WB2

NOT COMPATIBLE DISPLAY UNITS

• REDONDO-RT

OTHER SEARCH TERMS
RETROSOUND, retrosound, Zuma, zuma, ZUMA, Hermosa, hermosa, HERMOSA