Ampire AS100-2G - Neigungsensor Abschleppschutz für Alarm-Anlagen

The AS100-2G is a digital inclination sensor or position sensor. This sensor developed by Ampire Electronics works on a multi-dimensional level. This means that it does not matter whether you tilt the vehicle forwards, backwards or to the side, the alarm goes off. The sensor also detects movement in or against the direction of travel if the vehicle is moving. This sensor adjusts itself and never needs to be readjusted. Of course, it also recognizes whether you are parking, for example, on a slope and readjusts its basic position each time the alarm system is armed. The best installation space is under the driver's or front passenger's seat far to the outside in the sill area. The sensor is absolutely insensitive to heat sources or loud sound sources.

TECHNICAL SPECIFICATIONS

• Operating voltage: 12 volts DC
• Power consumption: <4.5 mA
• Sensitivity of the alarm triggering: <1.5 °
• Switch-on delay: 60sec.
• Load capacity alarm output: max.50mA
• Sensor output: short mass pulse in the event of an alarm
• Working temperature: -35 ° C to + 80 ° C
• Dimensions: 55 x 21 x 7 mm
• E approval: E20 97RA-01 1533

IMPORTANT NOTE

The AS100-2G must not be connected to a constant power supply. It only has to be supplied with voltage when the alarm system is activated. Please use the "ground when armed" output of the alarm system. The sensor calibrates itself in the first 60 seconds.

NOTE

The AS100-2G is the successor to the AS100, 507T and 507M inclination sensors.